GALACTI-KOTE® is a fluid applied, highly reflective, fibered elastomeric coating specifically formulated to address the problem of thermal shock to roofing substrates caused by rapid temperature changes. Elastomeric Coatings have long been used in all types of climates and countries for their waterproofing and reflective qualities. Modem elastomerics have often proved to be the product of choice for reroofing over sound substrates. GALACTI-KOTE® has incorporated the most advanced product technology; this includes the incorporation of DuPont KEVLAR® aramid fibers and a space-age ceramic material with high insulating value and the highest quality acrylic resin available. The result is a product unequaled in key performance properties such as flexibility, tensile strength, moisture vapor transmission rate, resistance to ponding water, and minimal change due to weathering. In environments where older, more conventional roofing products fail due to brittleness and cracking, GALACTI-KOTE® remains unaffected. Because it is water-borne, GALACTI-KOTE® meets VOC requirements and is easy to clean up.

Asbestos Encapsulation

GALACTI-KOTE® can be used to encapsulate asbestos on roofs and interior walls and ceilings. Once the asbestos fibers are encapsulated, the asbestos bearing material need not be removed in most places, but check your local requirements.

Cautions

Do not store in freezing conditions or let freeze during application. Do not apply when temperature is to drop below 35° Fahrenheit within a 48-hour period after application. Do not apply if rain is forecast within 24 hours.

This product is user-friendly, free of any toxic fumes (water-based) and requires no mixing or blending or complicated use of tools or equipment for application.

Benefits

• Ease of application by using spray rig, rollers or brushing
• Saves overhead and labor
• Up to a 20-year life expectancy with a limited 10-year warranty.
• Saves energy cost by reflecting the suns ultraviolet rays and acting as a radiant barrier
• Space-age KEVLAR® fiber helps bridge cracks, allows high film build, prevents "sliding" on pitched surfaces
• Tough, abrasion resistant surface allows foot traffic soon after drying

Tools Required

For spray application, we recommend Hydraulic Airless Spray Rig using 2 gallons per minute or better capacity. With air driven pumps use Graco's Bulldog, King or equivalent. Also, with spray equipment, use 3/8” or 1/2" hose and use #33 - 39 spray tip size.

Regarding application with roller or brush, do not cross roll or cross brush, apply in one direction.

Additional Products Available

GALACTI-KOTE® NON FIBERED
ELASTOMERIC COATING
MAS-STIX® ROOFING CEMENT
TY-ZON® PRIMER (used on rubber surfaced roofs)